AQUA-CLEAR® PFD

AQUA-CLEAR® PFD is a concentrated liquid dispersant polymer that provides superior slurry and sediment removal from the production site and gravel formation.

Contact our sales department

AQUA-CLEAR® PFD contains no phosphates.

AQUA-CLEAR® PFD is supplied in 1-gallon (3.8-litre) or 5-gal (19-litre) plastic buckets.

Applications / Fonctions

  • Disperses sludge, sediment and clay from the formation and gravel in the filtration interval.
  • Increases well productivity
  • Reduces development time

Avantages

  • ANSI/NSF Standard 60 certification
  • Safe for plastics, rubber and metals
  • No harmful vapours
  • Increased well capacity and throughput
  • Reduces pumping costs
  • Appearance – straw-colored liquid
  • Density – 1.2 to 1.4
  • pH (clean) – 6.5 to 7.5

Traitement recommandé

  • Determine the volume of water in the filter zone and double the calculated volume to account for the water contained in the gravel and formation, or determine the static volume of water and add an extra 50%.
  • Once the water volume has been determined, calculate the AQUA-CLEAR®PFD treatment volume using the following formula:
    • AQUA-CLEAR® PFD (gal or L) = 0.002 x Volume of water (gal or L)
      This equates to one gallon of AQUA-CLEAR® PFD for every 500 gallons of water (0.2% by volume), or 2.0 liters of AQUA-CLEAR® PFD for every cubic meter of water.
  • Mix well before introducing into the well.

The ideal application method uses a hopper line and the product is applied in the screened area.

If required, AQUA-CLEAR PFD/water solution can be poured into the well.

The mixture should be carefully incorporated into the well, then agitated using a powerful movement and buffer, jet or other developing technique at two-hour intervals over a 24-hour period. Pump the waste until the turbidity clears and connect to the distribution network.

Back to products